Barix Annuncicom 200

• G711, uLaw, aLaw, PCM Encoding
  
• MP3 Encoding (low Latency)
  
• AACplus, MP3, Ogg Vorbis, G.711, uLaw, aLaw, PCM decoding
  
• Shoutcast/Icecast Source capability
  
• Audio Level Supervision with SNMP Trap generation
  
• IP Streaming via TCP, UDP, RTP, Multicast
  
• Microphone Input
  
• Line Level Input
  
• Line Level Output
  
• Amplified Output 8 Ohm (8W)
  
• Relay Output (1)
  
• Contact Closure Input (2)
  
• RS-232 Serial Port (1)
  
• RS-485 Serial Port (1)
  
• Power Supply (PoE or ext)
  
• Supply Voltage (12..30V or 48V)
  
• Aiphone Door Station Interface (IE/JE series)

The Annuncicom 200 is a versatile Audio over IP device designed to serve as a gateway between IP Paging, VoIP and Intercom systems and traditional microphone/speakers, Aiphone stations or amplifers. Supporting both music (MP3) as well as voice codecs (G.711, uLaw, aLaw) and a large number of protocols (including shoutcast, SIP etc), the device can be used for both background music as well as VoIP applications.

Key Features
IP Paging and Intercom device with mic/speaker and line level interfaces. 2W output power into 8 Ohm and contact closure inputs, relay output. Useable as paging gateway, small zone device, Intercom device

Designed in Switzerland and being used in thousands of mission critical paging and intercom applications, the Barix Annuncicom series is the product of choice for IP based Paging, Intercom and VoIP applications worldwide.

Typical Applications

• VHF Radio Controller and interface to IP
• Microphone Encoder for IP Audio Surveillance
• Door Intercom Controller, VoIP based
• Help Point/SOS call box device
• Classroom VoIP device with built-in amplifier, talkback, serial port
• Paging and Audio Distribution with Amplifier control and monitoring
• Live IP Audio Encoder for Streaming Applications
• Generic, bidirectional full-duplex VoIP module for Paging and Intercom applications
• SIP and IP Paging Zone Device
• Digital Annunciator, Message Player, Message Repeater

Further documentation and software at Barix



An external PSU can be ordered additionally

SIP RAVA Application

SIP RAVA application has been developed to allow Barix Annuncicom 200 device to operate with Crestron RAVA PTT Touch Panels for door intercom applications.
While the device is operated in full duplex mode, it is recommended to use the Crestron RAVA panels in Halfduplex Push-to-talk to avoid feedback.
The Fimware is provided as binary image to be loaded direct onto the device using the usual WEB update function.



Electrical

• 16 to 30 VDC, 16 to 24 VAC, 12 Watt max. on screw terminal block and 2.1mm barrel connector
• 802.3af PoE 48 VDC, 12 Watt max. on RJ-45 connector and on screw terminal block

Ethernet

• 10/100Mbps auto,
• RJ-45 connector with integrated Link/Activity LED
• Protocols: TCP/IP, UDP, RTP, SIP, DHCP, Multicast capable

Microphone Input

• On detachable screw terminal block and 3.5 mm (1/8") Jack 3 pin TRS, with bias power 2.7VDC

Aiphone sub interface

• For Aiphone „IE" door stations, on screw terminal block

Analog Line Input (mono)

• Line level input, 2k Ohm input impedance on on screw terminal block, 2.2 VPP max, adjustable in sensitivity
• Frequency response 20 Hz .. 20 kHz (-3dB)**
• Dynamic range 87 dB, SNR -87 dB, THD <0.01% (-3dBFS)**

RS-232 and RS-485 Interfaces

• On 9-pin Sub-D connector
• 300..230´400 Baud asynchronous, tunneling or local control

Analog Line Output (mono)

• Line level output, 40..60 Ohm output impedance on screw terminal block, output level software controllable
• Full scale output voltage: 3 dBu, 3 VPP
• Frequency response 20 Hz .. 20 kHz (-3dB)**
• Dynamic range 94 dB, SNR -94 dB, THD <0.03 % (-3dBFS)**

Speaker out

• On detachable screw terminal block
• Suggested speaker impedance 8 to 16 Ohm
• 2 Watt max @ 8 Ohm
• Frequency response 20 Hz .. 20 kHz (-3dB)*,
• Dynamic range 80dB, SNR -80dB, THD <0.15% (-3dBFS)*MTBF

Mechanical

• Aluminum case, 420 g
• Dimensions 108 x 38 x 125 mm (4.25 x 1.5 x 4.92 inch)
• rack and wall mountable using accessories

Audio formats

• MP3 VBR, CBR*
• MP3, encoding/decoding up to 192/320 kbps
• PCM 16 bit and 8 bit (uLaw, aLaw) @ 8..48 kHz
• PCM, G.711, G.722*, encoding/decoding

Model comparison

• Model 60 (48 VDC) , PoE, 5 Watt
• Model 100 (9..30 VDC 12..24 VAC) USB 2 Watt
• Model 155 (24..48 VDC) 5.5 Watt
• Model 200 (16..30 VDC 48 VDC 16..24 VAC) PoE, USB, Aipohne 8 Watt
• Model 1000 (24..48 VDC)

Discrete I/O

• On detachable screw terminal block
• 1 relay output with normally closed and open contacts,30V 0.5A (AC & DC)
• 2 discrete / dry contact inputs

MTBF

• calculation min. 370 000h (according to MIL217F at 25°C)

* Hardware revision 2 only

** depends on used codec, best results @48kHz PCM




 Using Crestron Interface with the Annuncicom (540.1 kB)

 sip-2.12d-release-note.pdf (135.5 kB)

 sip-rava_quick_start.pdf (352.5 kB)

 sip-rava_user_manual.pdf (730.2 kB)

 Barix Annuncicom 200 Datasheet (290.9 kB)